[Tested] Fox Transfer Factory Dropper Seatpost

Back in Spring, right around Sea Otter time – which unfortunately never came to fruition in 2020 – Fox announced a complete revamp of their forks, rear shocks and seatposts for model year 2021. The Transfer seatpost has long been known for its reliability and sturdiness, but Fox managed to shorten its overall length drop some weight and open up longer travel offerings such as the 175mm option on test here. As of the time of writing this, they now even offer a 200mm option. I’ve been riding a 175mm “Factory” version on my Transition Sentinel for some time now – read on to see how it’s been working out..

Details

  • 100, 125, 150, 175 (tested) and 200mm travel options
  • 30.9mm and 31.6mm
  • Internal routing only
  • 475mm overall length (as tested at 175mm travel)
  • 637 grams (our scale / 175mm version)
  • 1X style lever: 34 grams (our scale)
  • $349 USD

The updated seal head now features a hex head, making it easier to repack the shaft seal with lube to keep the stanchion running smoothly.

As you can see above, the most visually different and striking aspect is the seatpost head, which takes on a completely new shape.

This new shape allows the head to sit up into the saddle further while allowing usable stanchion surface area to also move further upward. This assists in the goal of achieving the longest possible travel relative to the overall seatpost length. Incidentally, the new shape makes access via the T25mm torx keys a bit easier as they sit at more of a 45º angle.

The new 1X style dropper lever is a huge improvement. With that in mind, like the old version, it’s still very minimalist in its design.

The thumb paddle takes on a much different shape. It now integrates with brake levers from SRAM and Shimano with two inboard/outboard positions. Lastly, the new lever uses larger hardware (the old version used tiny, impractical allen screws)

At just 34 grams, the new lever is one of the lightest options on the market.

With that in mind, the Transfer seatpost itself also lost some weight. Our 31.6mm X 175mm travel version came in at 637 grams.

On the trail

Setup was a breeze – the head allows for quite a bit of range in saddle adjustment and easy fine tuning due to the angle the hardware sits at, as mentioned prior. Unsurprisingly this post had a familiar feel that was very much like its predecessor. One of the original Transfer’s best attributes was that it was easy to modulate the return speed via the lever. With some dropper posts, once the cable engages it comes flying up at one speed, but the Transfer is one of very few that you can actually feather the lever and therefore control the return speed nicely.

In terms of the structure, it’s very rigid and had virtually no side to side play – all in all it’s one of the sturdiest seatposts on the market. That comes at a slight weight penalty, but it’s not a tank by any means. The new lever is a huge improvement – the paddle surface is wider, flatter and much grabbier compared to the last version. As far as durability is concerned, after six plus months of steady use, nothing has come to my attention that would indicate the seatpost would need a teardown or service. At some points – usually after a bike wash – when the stanchion surface was dry it would get a hair sticky, but a couple of drops of stanchion lube now and again kept things moving fast and free.

Overall

The broad view here is that the Transfer Factory remains a tough, sturdy seatpost that’s built for the long haul. It received a slew of improvements – some minor, some major – which go a long way compared the original version. More travel at shorter overall lengths, an improved head and a far better lever being the highlights. In terms of value, it’s a hair on the pricey side, with a great deal of high value competition creeping into the market. Keep in mind the “Performance” version will save you a few bucks by dropping the Kashima coating, yet will retain all of the design highlights. All in all the Transfer is a tough, but refined seatpost with excellent lever control that’s in it for the long haul.

www.ridefox.com

Classifica generale Winter Cup 2024
Per partecipare carica le tue attività su Training Camp

Classifica mensile dislivello

Iscriviti al canale Whatsapp di MTB Mag per non perderti mai una notizia, clicca qui!

Share

Recent Posts

[First Ride] Transition Sentinel V3

In July I attended the launch of a new bike which I've given very high…

23/10/2024

2024 Red Bull Rampage Venue & Competition Details Released

Virgin, Utah (September 10, 2024) – In one month’s time, the first riders will drop in for…

11/09/2024

Redbull Rampage 2024: The Complete Athlete List

Virgin, Utah (August 21, 2024) – Eighteen of the top male freeride athletes have been invited to…

21/08/2024

Forbidden Druid V2: the true Pinkbike

Those who follow the mag assiduously will have noticed that one of the mountain bikes…

29/03/2024

[Review] Roval Traverse HD Wheelset

Late this Fall and throughout an unusually warm Winter I've been spending time aboard my…

15/03/2024

[Review] Specialized Epic 8 Evo

Specialized presents the new Epic 8, and with it the Evo version, i.e., the one…

12/03/2024