When news of Tyrewiz the tire pressure sensors, came out, many of the online comments were merciless. You can read them safely here. On the facts, they turned out to be without foundation. I have used Tyrewiz since April, and I can tell you that it is a product that deserves much more than a superficial comment.
The flat shape shown above differs from those sold in stores because these sensors are fitted as standard on Zipp 3zero Moto wheels, but their operation is identical.
The Tyrewiz consists of two parts: the actual sensor, with a compartment for the battery, and the tubeless valve. This has a small hole at the height where it will be “covered” by the sensor, which in this way will be able to measure the pressure. The two small rubber O-rings, positioned above and below the hole, seal the system and prevent the Tyrewiz from becoming loose on the valve. The sensor is held in place by a classic knurled and threaded ring that usually fixes a valve to a rim
Removing and installing a Tyrewiz is therefore quite simple. Put the valve through the rim, then place the sensor, screw the ring and you’re done. The pairing with the phone is fast, through the appropriate free app, while for a Garmin device it will be necessary to download the app, also free from the Connect IQ Store .
Even before setting out to ride, the use of Tyrewiz starts in the garage, for setting and checking the right tire pressures. First you need to set the desired pressure via the app, so that Tyrewiz knows what to indicate to the rider, both the LEDs, both on the app and on the GPS. There is also a function that helps to find a recommended pressure based on the tire and the weight of the rider.
The LEDs flash red if the pressure is too low, green if it is correct, and a fast red blink if it is too high. Similarly the indicators on the devices will have a black background if the pressure is wrong, white if it is the right one. The accuracy of the Tyrewiz, with two decimals, is immediately evident, better than many digital meters – there is no comparison with respect to a classic gauge.
Speaking of LEDs, these allow you not to even have to look at the phone or GPS: just turn on the system by spinning the wheels and take a look at the color of the light that is flashing. Regarding their activation: if you’re on a long road trip, it is better to remove the batteries otherwise the Tyrewiz will always remain on due to vibrations.
Once installed, the best way to keep tire pressure under control is to use a GPS device. on bumpy descents it’s impossible to look at the display, unless you choose a screen dedicated only to Tyrewiz with a giant version of the numbers and you risk looking away from the trail, but it is still convenient to be able to look at the values when you slow down or pause, to check that you have not punctured or lost air due to a burp of air from the bead.
The interesting thing, when looking at the GPS during the climb, is to see how the pressure varies depending on the temperature. A transition from cool temps in the shadows to warm sunny areas usually raises it by about 0.1 bar, which is also why you see a value too high in the image above. The opposite occurs when going from the shade to the sun.
What happens, in the long run, is that you learn exactly what pressure you can get the best performance out of your tires from, because it becomes very easy to experiment and reach the limit. That is generally found when the pressure is too low and you pinch flat. It is also clear how unbalanced the values of the gauges on floor pumps are and what the difference is, with the same tire and pressure values, between a super rigid rim and a more flexible one.
I point out that in the 6 months of testing the Tyrewiz has always worked perfectly and that the latex has never interfered, so the valves never clogged. Rarely the signal from a sensor was not picked up by the Garmin, but it returned after a minute or two. I have yet to need to change the batteries.
The Quarq Tyrewiz does its job perfectly to transmit accurate pressure, and has proven to be solid and reliable in the six months of testing. If you dig below the surface, you’ll find that with this system you can understand in every sharp detail which is the right pressure for your terrain and riding, allowing you to better understand what is perhaps the most crucial variable for riding your bike. With these premises properly understood it is possible to better digest the price.
Last Winter Push Industries unveiled a new shock dubbed the SV Eight. The new damper…
In July I attended the launch of a new bike which I've given very high…
Virgin, Utah (September 10, 2024) – In one month’s time, the first riders will drop in for…
Virgin, Utah (August 21, 2024) – Eighteen of the top male freeride athletes have been invited to…
Those who follow the mag assiduously will have noticed that one of the mountain bikes…
Late this Fall and throughout an unusually warm Winter I've been spending time aboard my…