Ibis presenta la nuova Mojo HD5, una bici da enduro con ruote da 27.5″ che prende spunto dalle preferenze del team Ibis che corre le Enduro World Series.
L’escursione posteriore è di “soli” 153mm, mentre la forcella è da 170mm.
Nuovo è il tuning delle sospensioni anteriori e posteriori battezzato Traction Tune, spiegato a fine articolo.
Accoglie reggisella telescopici da 175mm di escursione in taglia M e da 150mm in S.
La HD5 è stata progettata con una forcella da 170mm in mente.
Tutti i cuscinetti hanno garanzia a vita.
Passaggio dei cavi interno, guidato, anche quello del reggisella telescopico.
• Ruote 27.5”
• 170mm di escursione anteriore
• 153mm dw-link escursione posteriore
• Larghezza gomme fino a 2.6”
• Telaio completamente in carbonio
• 4 taglie S-XL, peso telaio 2.54 kg senza ammortizzatore
• Disponibile con Fox Float DPX2 o Fox Float X2
• Complete builds starting at 28 lbs/ 12.7 kg
• Movimento centrale filettato (73mm BSA)
• ISCG 05 con adattatore rimuovibile
• 37mm offset forka
• Angolo sella da 76°
• Passaggio cavi guidato
• Spazio per portaborraccia
• Size M-XL compatible with 170mm+ droppers, 125-150mm for smalls
• Polycarbonate downtube protector and molded rubber swing arm protectors • IGUS bushings in lower link, bearings in upper link
• 200×57 shock size
• Post mount 180 rear brake
• 203mm max rotor size
• 1x specific design
• Boost 148 spacing
• Tapered headtube and steerer: ZS44 upper, ZS56 lower
– Telaio con ammortizzatore Fox DPX2 Performance: 3380€
– Telaio con ammortizzatore Fox Float X2 Kashima: 3699€
– Bici completa a partire da 4839€ (kit NX)
Garanzia
• 7 anni sul telaio
• A vita sui cuscinetti
[Press Release] – Our full suspension models use the dw-link suspension platform. This system delivers efficient pedaling performance though pivot placement instead of shock tune. That climbing efficiency means that unlike many other suspension layouts, our bikes don’t require loads of compression damping to control pedal bob. Our suspension kinematics do the hard work.
Because we don’t need a lot of compression damping, we’ve pushed our suspension partners to develop lighter compression tunes. These lighter tunes make it easy for the rear wheel to get out of the way, allowing your bike to better absorb a bump. As we went progressively lighter, we found the shocks couldn’t rebound as fast as they could compress.
So the bike could soak up a hit but the shock couldn’t push the wheel down fast enough to track the backside of the bump. When the suspension doesn’t move fast enough to absorb or track a bump, the wheel gets hung up and you lose speed, steering, and braking control.
Using an innovative new data acquisition system developed by Motion Instruments, we were able to quantify what the critical wheel speed in both directions (compression and rebound) should be. Over two years, we’ve recorded over one thousand downhill runs and tested multiple shock tunes from six different manufacturers.
As we tested rear shock suspension tunes, the data proved that we also needed to custom tune our forks. We needed to increase the rebound speeds of the fork to match the performance of the rear wheel. By balancing the front and rear suspension so that the front and rear wheels do the same thing over a bump, we keep the bike chassis flat relative to the ground. This keeps the bike geometry consistent and gives you more predictable handling.
The result of all this testing is something we call Traction Tune. This new tuning philosophy delivers traction and control unlike anything you’ve ever experienced. Instead of bucking through rough sections, our custom fork and shock tune allow the wheels to flutter through terrain like a trophy truck storming through a set of whoops. You’ll also find it easier to lift the front over obstacles, sit back into a manual, and bunny hop. It makes any conditions feel like hero dirt and with all that extra speed, you’ll find yourself having to relearn your braking points on all your favorite trails.
We’ll be rolling out Traction Tuned Suspension across our product line:
Sono iniziati gli sconti del Black Friday, andiamo a vedere alcuni affaroni. Se trovate altri…
EXT presenta la Vaia, la sua forcella a steli rovesciati a doppia piastra di cui…
La seconda bici in alluminio di Atherton Bikes è la S.150. Eccovi tutti i dettagli.…
Abbiamo le gare di XC, di Downhill, di Enduro, ma nessuna di All Mountain. Con…
Della serie "front cattive", eccovi la Kona Honzo in acciaio di Livijus75, con tanto di…
Mondraker presenta la Arid Carbon, una gravel con telaio in carbonio, la prima del marchio…